Pro-lab Production Supplies

DCP Kit Standard

DCP – Standard Dynamic Cone Penetrometer Kit

This test is used to measure the insitu penetration resistance of soils by means of a dynamic cone penetrometer. It is limited to use in fine grained materials. The results may be used to estimate the field California bearing ratio (CBR) of cohesive soils. Dynamic cone penetrometer – complying with the essential dimensions and masses given in AS1289.6.3.2 Penetration Resistance with the 9kg Dynamic Cone Graduations in ‘mm’ The difference in standard to the extendable is that the extendable you can extend the length whereas the standard model only can penetrate a fixed depth.

Standard Model Kit – 1289.6.3.2.211
1x 1289.6.3.2.251 – Upper Rod
1x 1289.6.3.2.252 – Anvil
1x 1289.6.3.2.253 – Handle
1x 1289.6.3.2.253 – Lock Nut
1x 1289.6.3.2.242 – Coupling
1x 1289.6.3.2.231 – Standard Lower Rod
1x 1289.6.3.2.241 – Cone
1x 1289.6.3.2.255 – Hammer
1x 1289.6.3.2.261 – Wooden Box

Standard DCP Kit Diagram
  1. Cone
  2. Standard Lower Rod
  3. Coupling
  4. Anvil
  5. Hammer
  6. Upper Rod
  7. Locknut
  8. Handle
  9. Case ( not shown)

DCP Hammer

Cat Number 1289.6.3.255

Anvil

Cat Number 1289.6.3.252

Handle

Cat Number 1289.6.3.253

Locknut

Cat Number 1289.6.3.254

Cone

Cat Number 1289.6.3.241

Perth Sand Tip

Cat Number 1289.6.3.241

Pro-Lab DCP Cone Tip Checker

Cat Number 1289.6.3.2

Coupling

Cat Number 1289.6.3.242

Upper Rod

Pro-Lab DCP 16mm Extractor

Cat Number 1289.6.3.2.2981

Standard Lower Rod

Cat Number 1289.6.3.231

DCP Wooden Box

Cat Number 1289.6.3.261

Enquire about DCP Standard >>
Choose the standard model kit and /or the spare parts kit.